阀门材料性能参数（2）
时间：2010-7-16 9:34:18 来源：http://www.cnsjv.com 作者：三精阀门 阅读次数：1469| 合金 ALLOY |
ASTM编号 ASTM NO. |
其它合金编号 OTHER ALLOY DESIGNATION |
正常或高化学含量 NORMIAL OR MAX. CHEMICAL COMPOSITION | 正常物理特性 NOMINAL PHYSICAL PROPERTIES | ||||||||||||||||||||
| 铝 AL |
碳 CARBON C |
铬 CHROME Cr |
钴 COBALT Co |
铜 COPPER Cu |
铁 IRON Fe |
铅 LEAD Pb |
锰 MANGA- NESE Mn |
钼 MOLYB- NESE Mo |
镍 NICKEL Ni |
磷 PHOS P |
硅 SILICON Si |
硫 SULFUR S |
锡 TIN Sn |
钛 TITAN- IUM Ti |
钨 TUNG- STEM W |
锌 ZINC Zn |
抗拉强度 TENSILE STRENGTH Psi |
屈服强度 YIELD STRENGTH Psi |
% 伸张度 ELONGATION |
硬度 HARDENESS | ||||
| 不 锈 钢 |
锻304 Wrot 304 |
A-167-304 | UNS-S30400 | 0.08 | 19 | 2 | 9 | 0.045 | 1.0 | 0.03 | 75,000 | 30,000 | 40 | 202 HB | ||||||||||
| 铸316 Cast 316 |
A-351-CF8M | UNS-S31600 | 0.08 | 20 | 1.5 | 2.5 | 11 | 0.04 | 2.0 | 0.04 | 70,000 | 30,000 | 25 | |||||||||||
| 铸316 Cast 316 |
A-743-CF16F | 0.16 | 20 | 1.5 | 1.5 | 11 | 0.04 | 2.0 | 0.04 | 70,000 | 30,000 | 30 | ||||||||||||
| 铸316 Cast 316 |
A-743-CF8M | 0.08 | 20 | 1.5 | 2.5 | 12 | 0.045 | 1.0 | 0.03 | 75,000 | 30,000 | 30 | ||||||||||||
| 锻316 Wrot 316 |
A-276-316 | UNS-S31600 | 0.08 | 17 | 2 | 12 | 0.045 | 1.0 | 0.03 | 75,000 | 30,000 | 30 | ||||||||||||
| 铸410 Cast 410 |
A-217-CA-15 | 0.15 | 13 | 1 | 2.5 | 1 | 0.04 | 1.5 | 0.04 | 90,000 | 65,000 | 18 | ||||||||||||
| 锻410 Froged 410 |
A-182-F6A2 | 0.15 | 13 | 1 | 0.04 | 1.0 | 0.03 | 85,000 | 55,000 | 18 | 200/225 HB | |||||||||||||
| 锻410 Wrot 410 |
A-276-410 | UNS-S41000 | 0.15 | 13 | 1 | 0.5 | 0.04 | 1.0 | 0.03 | 100,000 | 80,000 | 15 | ||||||||||||
| 锻416 Wrot 416 |
A-582 | UNS-S41600 | 0.15 | 13 | 1.25 | 0.06 | 1.0 | 0.15 | 114,000 | 95,000 | 17 | 235 HB | ||||||||||||
| 锻420 Wrot 420 |
A-276-420 | UNS-S42000 | 0.15 | 13 | 1 | 0.04 | 1.0 | 0.03 | 250/450 HB | |||||||||||||||
| 铸合金20 Cast Alloy 20 |
A-743-CN7M | 0.07 | 20 | 3.5 | 1.5 | 2.5 | 28 | 0.04 | 1.5 | 0.04 | 62,000 | 25,000 | 35 | |||||||||||
| 锻合金20 Wrot Alloy 20 |
B-473-20C63 | UNS-N08020 | 0.07 | 20 | 3.5 | 2 | 2.5 | 35 | 0.045 | 1.0 | 0.035 | 85,000 | 35,000 | 30 | ||||||||||
| 锻17-4PH Wrot 17-4PH |
A-564-630 | UNS-S17400 | 0.07 | 16 | 3.5 | 1 | 4 | 0.04 | 1.0 | 0.03 | 115,000 | 75,000 | 18 | 255 HB | ||||||||||
| 钢 | 锻造碳钢 Forged Carbon Steel |
A-105 | 0.35 | 1 | 0.04 | 0.035 | 0.05 | 70,000 | 36,000 | 22 | 187 HB | |||||||||||||
| 铸造碳钢 Cast Carbon Steel |
A-216-WCB | 0.3 | 1.1 | 0.04 | 0.6 | 0.045 | 70,000 | 36,000 | 22 | |||||||||||||||
| 1 1/4铸铬钼钢 1 1/4 Cast Cr. Moly Steel |
A-217-WC6 | 0.2 | 1.2 | 0.7 | 0.55 | 0.04 | 0.06 | 0.045 | ||||||||||||||||
| 铸铬钼钢 Cast Cr. Moly Steel |
A-217-C5 | 0.2 | 5 | 0.55 | 0.55 | 0.04 | 0.75 | 0.045 | ||||||||||||||||
| 铸低碳钢 Cast Low Carbon Steel |
A-352-LCB | 0.3 | 1.0 | 0.04 | 0.6 | 0.045 | 65,000 | 35,000 | 24 | |||||||||||||||
| 镍 - 低碳钢 Nickel-Low Carbon Steel |
A-352-LC2 | 0.25 | 0.65 | 2.5 | 0.04 | 0.6 | 0.045 | 70,000 | 40,000 | 24 | ||||||||||||||
| 阀 内 件 钢 |
B-7合金钢螺栓 B-7 Alloy Steel Studs |
A-193-B7 | 0.4 | 1 | 0.85 | 0.2 | 0.035 | 0.25 | 0.04 | 125,000 | 105,000 | 16 | ||||||||||||
| 304不锈钢螺母 304 S.S. Nuts |
A-194-GR8 | 0.08 | 19 | 2 | 9 | 0.045 | 1.0 | 0.03 | 126/300 HB | |||||||||||||||
| 2-H合金钢螺母 2-H Alloy Steel Nuts |
A-194-2H | 0.4 | 0.04 | 0.05 | 250/300 HB | |||||||||||||||||||
| 普通钢螺栓 Reg. Steel Bolting |
A-307-Gr. B | 0.2 | 0.45 | 0.04 | 0.05 | 100,000 | 18 | 121/212 HB | ||||||||||||||||
| 钢螺栓 Steel Bolting |
A-449 | 0.4 | 0.6 | 0.04 | 0.05 | 120,000 | 92,000 | 14 | ||||||||||||||||
| 304不锈钢螺栓 304 S.S. Bolting |
A-493-304 | UNS-S30400 | 0.08 | 19 | 2 | 9 | 0.045 | 1.0 | 0.03 | 90,000 | ||||||||||||||
| 吊眼螺栓 Eyebolts |
A-489 | 0.48 | 1.0 | 0.04 | 0.25 | 0.05 | 75,000 | 30,000 | 30 | |||||||||||||||
| 密封螺母 Gland Nuts |
A-563-Gr. A | 0.37 | 0.55 | 0.35 | 1.0 | 0.35 | 0.04 | 0.2 | 0.05 | |||||||||||||||
| H/W螺母 H/W Nuts |
A-108-1020 | UNS-G10200 | 0.20 | 0.45 | 0.04 | 0.05 | 120/300 HB | |||||||||||||||||
| 旋启式螺栓销 Swing Bolt Pin |
A-108-1212 | UNS-G12120 | 0.13 | 0.85 | 0.10 | 0.20 | ||||||||||||||||||
| 支架轴罩套 Yoke Bushing Caps |
A-108-12L14 | 0.15 | 0.25 | 1.0 | 0.07 | 0.3 | ||||||||||||||||||
| 阀座垫圈底座 Seat Ring Base |
A-519-1026 | 0.25 | 0.75 | 0.04 | 0.05 | 55,000 | 35,000 | 25 | ||||||||||||||||
| H. F. |
（商标材料，如 Stellite 6*, Stoody 6和 Wallex 6.） (Trademark Materials like, Stellite 6*, Stoody 6, and Wallex 6.) |
AWS 5.13 | 1.25 | 29 | 55 | 2.5 | 3 | 5 | 105,000 | 10 | 350 HB | |||||||||||||
| 蒙 乃 尔 |
铸蒙乃尔 Cast Monel |
QQ-N-288-E | 0.5 | 0.3 | 30 | 3.5 | 1.5 | 60 | 1.5 | 65,000 | 32,500 | 25 | 125/150 HB | |||||||||||
| 锻蒙乃尔（K-500） Wrought Monel (K-500) |
QQ-N-286-C1B | 3.0 | 0.1 | 24 | ||||||||||||||||||||
下一条：阀门材料性能参数（1）
上一条：阀门材料的温度极限
